Страница "Машины" в Максоптре отображают машины вашего флота. Наряду с водителями, они будут использоваться при создании маршрутов. Для создания или настройки машин, убедитесь, что выбранная роль - "Администратор аккаунта", а вы находитесь на странице "Машины" на вкладке "Настройки":
Нажмите кнопку "Создать", чтобы создать новую машину:
Укажите Регистрационный номер машины. Если хотите, вы можете использовать любое другое имя для машины вместо регистрационного номера:
Выберите Распределительный центр, к которому принадлежит данная машина, и в поле "Максимальная скорость" укажите максимальную разрешенную скорость:
Чтобы замедлить или ускорить машину, вы можете использовать параметр "Корректирующий коэффициент времени вождения":
Предполагаемое время в пути из точки А в точку Б для данной машины будет умножено на это число. Например, For example, the correction factor of 1.3 will make the driving times thirty percent longer. So, if you find the Maxoptra driving time estimation is too optimistic, you can always come back here and increase the correction factor. The default value for the correction factor comes from the settings of the Distribution centre this vehicle is assigned to. You can override this value by enabling the checkbox next to this field and changing the value to something different. If you do not do that, any change you make to the correction factor on the Distribution centre will affect this vehicle immediately.
Choose the cost per mile for this vehicle. This cost is used by Maxoptra to optimise the routes. It does not have to be accurate. However, if you have a mixed fleet of different vehicle types, you can get better planning results by making sure that larger vehicles have a higher cost per mile. The capacity is the maximum payload this vehicle can take. By default, the vehicle capacity is limited by weight measured in kilos. However, you can change this and define your own capacity measurements on the Capacity units page of the Settings tab.
You can assign a driver to this vehicle if you already have the drivers set up in Maxoptra. If you leave this field blank, however, Maxoptra will suggest creating a driver automatically:
Подробнее...